Our learning is structured around these key areas:
Courses, workshops and membership surgeries to help you achieve professional qualification.
Access videos covering key areas of professional qualification.
Courses, help and advice to advance your career no matter what stage you are at.
Specialist training courses let you learn new skills and add to your personal development.
Earn new qualifications to boost your career and demonstrate your abilities.
The Francisco Street Reservoir in San Francisco, California, that dates to the 1850s, now does double duty as a source of non-potable water and a park.
The Francisco Street Reservoir now does double duty as a source of useful non-potable water and a park for the local community, thanks to a stormwater collection system underneath it.
Originally built in 1859, it was the first large reservoir in San Francisco, California, which was designed to supply fresh water to the rapidly increasing population brought on by the gold rush and the Comstock lode.
At first, water was delivered downhill to the reservoir from Mountain Lake using a wooden flume and pump systems at the base of the hill.
Decommissioned in the 1950s, the site was to be redeveloped, but the Francisco Park Conservancy fought for decades to keep it as a natural resource that would include harvesting rainwater.
The 4.5-acre Francisco Park features a picnic area, dog run, community garden, reservoir interpretive area, children’s playground and restrooms.
Underneath the large central open area is a stormwater capture and reuse system that will perpetually provide water for the park’s irrigation and toilets.
Collected stormwater is treated to produce non-potable water that meets San Francisco Department of Public Health standards. This water is reused to meet the site’s irrigation and the flushing needs of six toilets.
The stormwater is first stored in a 1.9 million-litre cistern at the top of the hill before being transferred to the service building, where it flows through a series of filtration and disinfecting processes.
This ensures that the water meets public health regulations, while saving 5.7 million litres of potable water every year by not having to use city water.
There is also a smaller unit at the bottom of the hill. The engineers decided to use a system of arched chambers because they would provide the largest storage volume per square metre.
“The reservoir is on a slope that is just under 20 percent [incline]. It’s a very challenging site from a variety of perspectives,” explained Cody Anderson, principal of Sherwood Design Engineers (San Francisco) and responsible for the stormwater system.
“Normally you’d have your catch basin at the bottom of the site. Here, the historic reservoir is midway up the slope, so half the runoff is collected via gravity flow and the rest collected at the bottom of the site and pumped. All captured runoff flows through the screening filtration and into the chambers for storage and later use.”
Two types of StormTech chambers, from suppliers Advanced Drainage Systems (ADS), were installed using 35 x 45 metres of the existing reservoir and then covered with soil.
The system has 72 StormTech MC-3500 chambers and 300 StormTech MC-4500 chambers for a total storage capacity of 2,000 cubic metres of water in a 1,682 square metre footprint area. ADS StormTech chambers provided the best ratio of storage volume to footprint area.
The storm chambers are independently tested, BBA-approved and fully compliant with ASTM F2787, F2418 and F2922. ADS StormTech is engineered to provide a durable below ground surface water attenuation and storage solution for any size of commercial, residential, industrial or infrastructure installation.
Three StormTech Isolator Rows are included in the system. These patented water quality treatment devices are integral to the StormTech system. They capture the ‘first flush’ and trap sediment and other total suspended solids (TSS) and other pollutants coming from stormwater runoff.
In this project, standard StormTech chambers were deployed in a unique way to solve this engineering challenge. StormTech chambers come in a wide range of sizes, making it easy to install for all conditions, including small chambers for shallow invert depths, and large chambers for reduced footprints.
They're also highly adaptable and can be configured around obstacles and afford multiple inlet and outlet positions. Standard pipe manifolds, manhole & access chamber inlet/outlet structures and flow controls can be used.
An additional benefit is that StormTech chambers can be maintained using standard sewer cleaning equipment.
“We do a lot of projects where we look at holistic water management,” Anderson said.
“There are competing products on the market, and we needed to store as much water as possible in the given area. We work on projects around the globe with an emphasis on sustainable development and we’re known for having the vision and the technical capacity.
“The Francisco Park is one of those projects of a lifetime. It’s reclaiming an area in the city of San Francisco that is now a beautiful park for the people."
For more information contact Stuart Crisp – UK Manager ADS StormTech on 0203 442 0607 or email [email protected]
This is a sponsored case study provided by ADS StormTech. Views expressed do not reflect those of ICE.
Do you or your company have a project you'd like to share with civil engineers from across the globe?
Our Knowledge Marketing team sources content from across the world of civil engineering, as well of as offering opportunities for sponsorship.
ICE provides world class training for civil engineers looking to develop their skill set.